German / Deutsch Forum:   German / Deutsch

Topic: Suddenly, remote control changed

No, thanks. I have so much old objects all around here to repair. 55 yr old tractor, an old yamaha, different instruments and so on.

Well, if you need more..  (or anyone else) I have too many now. So I am selling some of my radios so that I can get some newer models to test.. I will put an advertisement on the front page.

O.K. that sounds fine. Tnx for your help. I love to use my new old radio.

Yes, the Konig is the one that is causing some trouble..
1.49 should be available within the next few days.
The remote control app is a new project and initial app. The aim is to get an Android app and possibly iOS and Linux apps next.

 


I have tried the firmware SD. That works fine. When, do you think the 1.49 fw will be available?

There is a Konig internet radio and a TV rc. Do they send without touching them?
The network control is only for windows, it seems. I m using Linux.

(Last Edited by LarsMinit on April 11, 2013, 1:03 pm)

The Aigo detection is normally not possible as the buttons (infra red scan codes) that trigger the selection do not exist on the other remote controls.

Is it possible that you have a remote control for a different device around you? maybe for a DVD player or so.. Because that could have send the scan code. In that case that remote has more codes that will functions.
The detection is removed from 1.49.

Network control is available via an app (see forum about network control) but you would need to have enabled network control previously.

The fs_fwrec file is the trigger for the loader program. It is included with the firmware files and used for firmware upgrading.
If the loader program is not triggered at startup, the sd card was not read properly.


Nothing happens. Normal startup and no way to control the device. 
Is there no way to manage the device via network?

I removed this so it can not happen by accident anymore.
A reboot did not fix your remote control settings?

We have a fail safe trick in case something goes badly wrong.
Take an SD card and put a file on it with the name "fs_fwrec"  contents of the file are not important can be empty but it is also fine if it is a document etc.
Insert the sd and power on your Arnova.. then select option 4 clean device config files.

 


Hallo, ich wollte heute ein Aktienkürzel in der App für Aktienkurse eintragen.
Während des Tippens erhielt ich eine Nachricht "Avio remote control detected, go to settings......"
Jetzt kann ich das Gerät nicht mehr steuern.Auch von den Tasten am Gerät geht nur noch der Ein/Aus Taster.
Ich benutze die original extended Fernbedienung.
Gibt es denn eigentlich ein Interface für Network remote control?
Schon mal vorab vielen Dank.
Und ich bin begeistert, was die doofe Kiste Dank eurer firmware alles kann.
Ich hätte gern ein LL Logo beim Start statt ARNOVA. 

(Last Edited by LarsMinit on April 11, 2013, 12:17 pm)

 
 

Get notified of new forum posts via