The Webstation Internet Radio and TV Database

penbex · February 2, 2013, 9:24 pm

Not really important anymore since we now have our own recovery mode..

Unless your xoro is broken and you did not install the recovery mode yet.. Then your only chance is the originalmrecovery..if present..

To test, unplug device, press and hold (keep pressed) the back and power buttons then insert the power cable.

See what it does at startup..

icarni · February 2, 2013, 7:42 pm

Ok, but which of them do not (have the recovery mode) ?

penbex · January 14, 2013, 12:21 am

The p versions are patched original versions.

The patch is just using our database and not the chinese database.

I pulled the patched versions and any kind of support going from the listenlive firmware back to the original over a year ago when i found out that the original firmwares (and this also the pathced versions) had a timebomb inside.

I need to know if you have a rm001 rm002 or rm003 and the first part of the serialnumber (mail me at ...) to see how to get it fixed.. Luckily most of the xoro models have a recovery mode..

William

fireblade64 · January 13, 2013, 9:39 pm

I do not have the Original Firmware.
I have the Firmware 189p from here.

penbex · January 13, 2013, 9:13 pm

Could be many things. If the loader you tried to update with was not correct for your model you would get a message about that.
I would not be amazed if the device already has an issue with the flash memory (timebomb in the original firmware)

fireblade64 · January 13, 2013, 7:01 pm

Nicht mal einen klitze kleinen Tipp?

fireblade64 · January 12, 2013, 12:17 pm

Ich kann kein Update auf die LLFirm 1.45 machen.
Versuche den Loader V2 zu instalieren, aber der Ladebalken läuft und läuft und läuft.
Aktuelle Firmware ist die 189p.
Nach ausschalten und wieder einschalten ist nichts passiert die alte Firmware ist immer noch drauf.
Versucht habe ich von SD so wie von Intern, aber keine chance.

Hat einer ein Tipp?

Forum: German / Deutsch

Topic: Xorox HMT 350 Update funktioniert nicht

penbex

February 2, 2013, 9:24 pm #1

icarni

February 2, 2013, 7:42 pm #2

penbex

January 14, 2013, 12:21 am #3

fireblade64

January 13, 2013, 9:39 pm #4

penbex

January 13, 2013, 9:13 pm #5

fireblade64

January 13, 2013, 7:01 pm #6

fireblade64

January 12, 2013, 12:17 pm #7

	Main Board Index Forum Index Forum: German / Deutsch Topic: Xorox HMT 350 Update funktioniert nicht penbex Status: Offline Messages: 2421 Registration date: May 21, 2009 Xorox HMT 350 Update funktioniert nicht February 2, 2013, 9:24 pm #1 Not really important anymore since we now have our own recovery mode.. Unless your xoro is broken and you did not install the recovery mode yet.. Then your only chance is the originalmrecovery..if present.. To test, unplug device, press and hold (keep pressed) the back and power buttons then insert the power cable. See what it does at startup.. icarni Status: Offline Messages: 7 Registration date: September 5, 2011 Xorox HMT 350 Update funktioniert nicht February 2, 2013, 7:42 pm #2 Ok, but which of them do not (have the recovery mode) ? penbex Status: Offline Messages: 2421 Registration date: May 21, 2009 Xorox HMT 350 Update funktioniert nicht January 14, 2013, 12:21 am #3 The p versions are patched original versions. The patch is just using our database and not the chinese database. I pulled the patched versions and any kind of support going from the listenlive firmware back to the original over a year ago when i found out that the original firmwares (and this also the pathced versions) had a timebomb inside. I need to know if you have a rm001 rm002 or rm003 and the first part of the serialnumber (mail me at ...) to see how to get it fixed.. Luckily most of the xoro models have a recovery mode.. William fireblade64 Status: Offline Messages: 6 Registration date: December 9, 2011 Xorox HMT 350 Update funktioniert nicht January 13, 2013, 9:39 pm #4 I do not have the Original Firmware. I have the Firmware 189p from here. penbex Status: Offline Messages: 2421 Registration date: May 21, 2009 Xorox HMT 350 Update funktioniert nicht January 13, 2013, 9:13 pm #5 Could be many things. If the loader you tried to update with was not correct for your model you would get a message about that. I would not be amazed if the device already has an issue with the flash memory (timebomb in the original firmware) fireblade64 Status: Offline Messages: 6 Registration date: December 9, 2011 Xorox HMT 350 Update funktioniert nicht January 13, 2013, 7:01 pm #6 Nicht mal einen klitze kleinen Tipp? fireblade64 Status: Offline Messages: 6 Registration date: December 9, 2011 Xorox HMT 350 Update funktioniert nicht January 12, 2013, 12:17 pm #7 Ich kann kein Update auf die LLFirm 1.45 machen. Versuche den Loader V2 zu instalieren, aber der Ladebalken läuft und läuft und läuft. Aktuelle Firmware ist die 189p. Nach ausschalten und wieder einschalten ist nichts passiert die alte Firmware ist immer noch drauf. Versucht habe ich von SD so wie von Intern, aber keine chance. Hat einer ein Tipp? Main Board Index Forum Index