Main Board Index Forum Index

ListenLive Firmware development Forum:   ListenLive Firmware development

Topic: Firmware 1.0 feedback and bugfix progress report

December 29, 2011, 7:35 am #1

Maybe it's help, after the downgrade i have made, all the things it can be switch on/off in the modified Firmware it was on/off in the new Firmware.

Also after downgrade, i made the settings network and have only gave a password, dhcp is on, timezone is as before, Internet time is on, favorites are the same and so on. Only one thing, the backgrounds are missing. In the menu i select other than the first and get a message  it's switch to number X but fall back all times to number one.

Edit1:

I see in other thread, on your todo list >WEP support (only 1st key is supported now) Hidden SSID and SSID with spaces<

In 1.85p it works fine with spaces, Hidden SSID too! In the 1.0 it has works too with spaces, Hidden don't probe!

Edit2:

I have play i wile with the Arnova, made an factory reset and the broken backgrounds are be there. Next i update till 1.2a and play some more time. If i found some issue it couldn't find in the feedback thread from 1.2a i tell it there.

Edit3:

So aim at the end of my possibility, the device has decide it's war and nothing else. It's nerveless reachable at PC as disk, the File Error exist as before. It would be nice william if you can give me something on hand.

(Last Edited by rst001 on December 29, 2011, 11:21 am)



(Last Edited by rst001 on December 29, 2011, 2:01 pm)
(Last Edited by rst001 on December 29, 2011, 3:43 pm)
December 26, 2011, 6:51 pm #2
OK, all the time it needs.
December 26, 2011, 6:34 pm #3
Yes, there is.. but give me some time to sort things out...
December 26, 2011, 6:13 pm #4

Something  go's wrong wen i update my Arnova.

I have update it from the modified 1.85p up to the replacement 1.0 wen the firmware was brand new, probe this and that and decide that the 1.85p was the better one for the moment. Now i will probe the 1.2 and run first the update 1.0 and become always an file error.

Is there a way William?


December 25, 2011, 4:29 pm #5
other thread

(Last Edited by heinz57g on December 25, 2011, 7:13 pm)
December 25, 2011, 4:25 pm #6
other thread

(Last Edited by heinz57g on December 25, 2011, 7:12 pm)
December 22, 2011, 7:37 pm #7
Hi,

I've just tried to update my ertv 208 from 1.84 to 1.0. Although update to 1.84 was all fine previous time, now I got "file error" issue after few minutes.
I have re-downloaded the zip once again, but the same problem remains. Does anyone have solution for this?

Thanks a lot

(Last Edited by lemmy on December 22, 2011, 7:37 pm)
December 21, 2011, 10:34 pm #8
already answered in my post 39: NO in both cases.

greetings      - heinz -

(Last Edited by heinz57g on December 21, 2011, 10:53 pm)
December 21, 2011, 8:39 pm #9

SSID hidden or more than one word? Known issue and solved here.

Quote:

the only thing that doesnt work is the ARNOVA on the new FW 1.0, as
mentioned. connects, and disconnects the second the internet is accessed.
December 21, 2011, 8:06 pm #10

Hi there,

I'm currently waiting for the release of the new firmware and don't know if someone mentioned something like this:

The most annoying thing for me regarding the chinese rubbish on my Arnova was, that when I switched on my device I had to click through many ups and downs in order to start my favorite channel. An update available on this site changed this behavior and asked me further on every time when I switched on my Arnova if I wanted to continue with the last channel played...

So, would it be possible to change the behaviour of the Arnova in a way that the device starts with the channel played before when I switch on the radio without asking for something? Could be something in the options section...

By the way: No german TV station stream is working on my 1.0 firmware. N-TV did this before the update...

Regards,
Heiko

Quote:

I am working on everything that was reported in the other thread. Of course the most critical issues are worked on first...
More feedback is welcome. 


Release expected very soon.. doing final tweeks..!! *probably 20th/21st*


(Last Edited by penbex on December 20, 2011, 10:37 am)

(Last Edited by Trashware on December 21, 2011, 8:08 pm)
December 20, 2011, 11:29 pm #11
Ok, lets see how the 1.1 goes then. Working on the packages now.
If it remains a problem I probably make some beta version(s) for you to find what is causing the problem.
December 20, 2011, 8:59 pm #12
not sure if this makes finding the fault easier, but we have now
connected nine 'things' to this WLAN, one by one, and all work fine:

 - one PEARL unit FW1.84
 - one XORO unit FW1.89
 - two laptops
 - one desktop
 - one tablet
 - two mobile phones
 - one netbook

all connect perfectly, and work fine on the internet.

the only thing that doesnt work is the ARNOVA on the new FW 1.0, as
mentioned. connects, and disconnects the second the internet is accessed.

greeting    - heinz -



(Last Edited by heinz57g on December 20, 2011, 9:48 pm)
December 20, 2011, 8:25 pm #13
 >> You are not using the 1.0 at the moment?

funny question, see my post 39 above.  FW 1.0 is on the unit, and i am TRYING to
use it, but since it cannot hold onto the WLAN, i can, right now, use nothing.

rather frustrating.

 >>  it is fine to install 1.0 and then do the update to 1.1 from the SD card

ah, great. i thought from above that you can only auto-update when you turn on
the unit with FW 1.0.

now a bit relieved. might still be able to use it before xmas - and then present
you with a long list.

greetings      - heinz -

(Last Edited by heinz57g on December 20, 2011, 8:50 pm)
December 20, 2011, 3:55 pm #14

You are not using the 1.0 at the moment?

Anyway, it is fine to install 1.0 and then do the update to 1.1 from the SD card. LAN is not needed for that.

 

December 20, 2011, 3:51 pm #15
 >> all 1.0 users will get a notification when they start their device

wow, that would totally leave me out in the cold! the 1.0 FW does not let me
use my WLAN, and the new-new FW will only update if the previous version
works. so much for thinking the new-new one would solve my problem ...

a cat biting its tail? and heinz running in circles?

a very merry christmas time to all of you too       - heinz -

(Last Edited by heinz57g on December 20, 2011, 3:52 pm)
December 19, 2011, 7:14 pm #16

Gospel has serious server issues and their streaming server appears to be unreliable.
Their website also has some bugs.

The links in out database are correct but it often does not connect.

 

December 19, 2011, 5:20 pm #17
Hi All.

Could please someone using the new firmware check if one specific radio works? This is the only radio my wife listens to so if it works with the new firmware I will update the firmware otherwise I will stick with the 1.85 for the time being.

This specific radio can be found at:  South America, Brazil, Radio Gospel 90.7 FM - Araras.

Thanks in advance and best regards,



December 19, 2011, 5:14 pm #18
Yes, it will be psoted here and on the main page as well.
December 19, 2011, 4:47 pm #19
would you mind posting a note here in the forum at that time. I 'd like to stay with 1.85  as long as upnp does not work.

Quote:
If all goes as planned, if the update is available all 1.0 users will get a notification when they start their device.
December 19, 2011, 4:42 pm #20
If all goes as planned, if the update is available all 1.0 users will get a notification when they start their device.
December 19, 2011, 3:47 pm #21
Btwo you annonce the "minor update" or do you expect us to tae (try and error)?

Quote:
More updates done to the software. New version will be released soon.
It will be a small update file that can only be loaded from the 1.0 firmware.

December 18, 2011, 11:47 pm #22
i cannot do much, because for xmas i am with friends in austria, and thats where
i was doing those tests. even not my computer.

the SSID is surely just a chain of numbers and letters, no spaces or whatever special.

let me repeat what i find strange: the connection shows as strong and stable, and
sits there for as long as i want. it ONLY breaks down once it try to actually connect
to the internet, like playing a station.

telnet i can right now not do, i am not really firm with it, and the lady who owns
the computer setup here already eyes me with suspicion. where ARE those two files
you were asking for?

and what version nbrs do you mean? of the units, or the FW? all of them, except the
ARNOVA, are as they came from the shop.

greetings       - heinz -

(Last Edited by heinz57g on December 18, 2011, 11:48 pm)
(Last Edited by heinz57g on December 19, 2011, 1:52 pm)
December 18, 2011, 10:55 pm #23
Quote:

anybody ever noticed any router/accespoint related issues?

my three units (XORO and PEARL on old firmware) and ARNOVA (new
FW) connect fine to the WLAN of a cheap but solid TP-LINK router.
the XORO and PEARL also to a much newer THOMPSON TG585 v7.
but whatever it do, i cannot connect the ARNOVA to the THOMPSON.

Hi, can you list the version numbers. Also, can you telnet into the Xoro or Pearl?
If so, can you mail/upload /mnt/mtdblock7/w.conf fro mthe Xoro or Pearl?  (Of course you can open the file with a text editor and replace the password and ssid with X-es or so.. like so: 
                                                         
        ssid="xxxx"                                                         
        psk="xxxxxxx" 

Note that if the Arnova is on 1.0 firmware it will fail to connect if the SSID is hidden or has spaces in it.

William


(Last Edited by penbex on December 18, 2011, 10:56 pm)
December 18, 2011, 10:23 pm #24
anybody ever noticed any router/accespoint related issues?

my three units (XORO and PEARL on old firmware) and ARNOVA (new
FW) connect fine to the WLAN of a cheap but solid TP-LINK router.

the XORO and PEARL also to a much newer THOMPSON TG585 v7.

but whatever it do, i cannot connect the ARNOVA to the THOMPSON.
(and i cannot really change my house right now). it connects, stays on
full signal, fine. then whatever it do to connect to an actual station, or
even just to connect to your server in order to select my user/favorites
name, it disconnects the WLAN connection (green to red - resp a crossed
out bar display. and does not reconnect.

any idea? if it is important: 23:20 sunday 18dec.

greetings   - heinz -



(Last Edited by heinz57g on December 18, 2011, 10:25 pm)
December 18, 2011, 12:51 pm #25
Quote:

Hi all, i have an odd behavior, does someone else noticed this as well?

I use the mediaplayer to play music files. after power up i select a folder with music files and press the PLAY button (to play the folder), the music starts and all is OK. If i afterwards select another folder and press the play button the music from the first selected folder (after powerup) will be played, The display however displays the (proper) seleceted music file. Playing files with the OK button is always 100% OK changing folders. It seems that the PLAY button keeps the first selected folder in the cache, and does not updates the selected folder, the display however seems to be showing to proper file. (I am using a 8Gb Sd card). Is my SD card bad, or perhaps a sw bug?


update, a second SD card has similar behavior, (i am not sure about my remarks on the display, the second SD showed also wrong songnumber from previous folder??)
(Last Edited by hans on December 18, 2011, 12:10 pm)

Yeah, Good find .. I noticed too
Already fixed when I fixed the other mediaplayer issues.

December 18, 2011, 6:59 am #26

Hi all, i have an odd behavior, does someone else noticed this as well?

I use the mediaplayer to play music files. after power up i select a folder with music files and press the PLAY button (to play the folder), the music starts and all is OK. If i afterwards select another folder and press the play button the music from the first selected folder (after powerup) will be played, The display however displays the (proper) seleceted music file. Playing files with the OK button is always 100% OK changing folders. It seems that the PLAY button keeps the first selected folder in the cache, and does not updates the selected folder, the display however seems to be showing to proper file. (I am using a 8Gb Sd card). Is my SD card bad, or perhaps a sw bug?


update, a second SD card has similar behavior, (i am not sure about my remarks on the display, the second SD showed also wrong songnumber from previous folder??)
(Last Edited by hans on December 18, 2011, 12:10 pm)
December 17, 2011, 7:58 pm #27
Hi, Penbex. I own a Xoro 350 and I´m very grateful that you´ll be doing a new firmware for our radios. One question, would it be possible to put an app like "Tunein radio" in our machines?, I know it´s a very interesting app in android. Perhaps in the 2nd list (the not so important things)
Thank you.
December 17, 2011, 4:03 pm #28

No, that would not solve your problem. I might have another solution for that.

 

December 17, 2011, 1:51 pm #29
Can you make two files? One small (just update) and one big (complete v1.0.1 or whatever).
For those who can't install v1.0 (file error) or for those who are still on 1.85(p).

Quote:
More updates done to the software. New version will be released soon.
It will be a small update file that can only be loaded from the 1.0 firmware.
December 16, 2011, 10:38 pm #30
More updates done to the software. New version will be released soon.
It will be a small update file that can only be loaded from the 1.0 firmware.
December 16, 2011, 12:18 pm #31
Quote:

Hm.. I do not think telnet blocks from other subnets etc. Probably a router or firewall issue.
But have not tested this.

Problem solved, configuration error on firewall, telnet (& ping) works outside local network.

December 16, 2011, 10:12 am #32

Hm.. I do not think telnet blocks from other subnets etc. Probably a router or firewall issue.
But have not tested this.

December 16, 2011, 9:55 am #33

William, i am running software for 1 week, this is TOP software...., i am still very happy!

Can you confirm that telnet is only possible from local subnet. I am running the device from a DMZ and can't access the device from another subnet?

(if so, there is NO need to change the software! but please confirm, otherwise a have a firewall issue.)


(Last Edited by hans on December 16, 2011, 9:56 am)
December 15, 2011, 2:52 pm #34
Quote:
Quote:

Google-translated from Russian: 

Official Firmware V-Duck Mediabox Supported formats:
Video: MKV, MOV, AVI, ASF, WMV, FLV, RMVB, DAT, M4V, XVID
Audio: MP3, AAC, APE, FLAC, M4A, RM
Photo : JPEG format supports.

And what is your firmware? Sorry, but the full list is not found.

Video:
MKV, MOV, AVI, ASF, WMV, FLV, RMVB, DAT, M4V (H.264), XVID, 3GPP, 3GPP2, M2V (MPEG-2), MP4 (MPEG-4)

Audio:
MP3, AAC, APE, FLAC, M4A, RM, OGG, WAV, WMA, ATRAC

Photo :
JPEG, GIF, PCX, TIF, TGA

Anything missing?


No, everything is in order. Thank you! 

December 15, 2011, 2:34 pm #35
Quote:

Google-translated from Russian: 

Official Firmware V-Duck Mediabox Supported formats:
Video: MKV, MOV, AVI, ASF, WMV, FLV, RMVB, DAT, M4V, XVID
Audio: MP3, AAC, APE, FLAC, M4A, RM
Photo : JPEG format supports.

And what is your firmware? Sorry, but the full list is not found.

Video:
MKV, MOV, AVI, ASF, WMV, FLV, RMVB, DAT, M4V (H.264), XVID, 3GPP, 3GPP2, M2V (MPEG-2), MP4 (MPEG-4)

Audio:
MP3, AAC, APE, FLAC, M4A, RM, OGG, WAV, WMA, ATRAC

Photo :
JPEG, GIF, PCX, TIF, TGA

Anything missing?

December 15, 2011, 12:37 pm #36

Google-translated from Russian: 

Official Firmware V-Duck Mediabox Supported formats:
Video: MKV, MOV, AVI, ASF, WMV, FLV, RMVB, DAT, M4V, XVID
Audio: MP3, AAC, APE, FLAC, M4A, RM
Photo : JPEG format supports.

And what is your firmware? Sorry, but the full list is not found.
December 14, 2011, 7:10 pm #37
Since the original firmware I was missing the possibility to choose the screen saver between clock or picture Slideshow.
I have my Arnova in the kitchen, and would be nice that after some time it starts to show the pictures (slideshow settings) instead of clock.
What do you think?

Quote:
Auto power off / Sleeptimer and screensaver are added to the code.
The first post in this thread shows all changes sofar.
December 14, 2011, 1:07 pm #38
Since my son played around with the arnova I m not sure which fw ... maybe it was your 1.85p .... sorry .. not helpful I guess


Android .. okok, stupid Idea

Quote:
Quote:
Alarm is not working (for my Device):

On what firmware is that?

Quote:

by the way ... do you think that there is a way to run android on the arnova?

In theory its possible. But steering Android with the remote is not a fun task I guess..

 

December 14, 2011, 12:41 pm #39
Quote:
Hey, I think I figuered out, why Alarm is not working (for my Device): It is working indeed, but the volume level in settings is not stored to the level  I set. When leaving settings, menu volume is always reset to zero ... so I am not aware of the Alarm. Maybe only for my Unit of course ... or maybe helpful


Ouh, and during the suggested Alarmperiod there is no way to rise the volume. Upon pressing the vol key I can hear some sound for some half second and then dropping back to zero .... repeatedly

On what firmware is that?

Quote:

by the way ... do you think that there is a way to run android on the arnova?

In theory its possible. But steering Android with the remote is not a fun task I guess..

 

December 14, 2011, 12:22 pm #40
by the way ... do you think that there is a way to run android on the arnova?
December 14, 2011, 12:09 pm #41
Hey, I think I figuered out, why Alarm is not working (for my Device): It is working indeed, but the volume level in settings is not stored to the level  I set. When leaving settings, menu volume is always reset to zero ... so I am not aware of the Alarm. Maybe only for my Unit of course ... or maybe helpful


Ouh, and during the suggested Alarmperiod there is no way to rise the volume. Upon pressing the vol key I can hear some sound for some half second and then dropping back to zero .... repeatedly

(Last Edited by oldtrappertom on December 14, 2011, 12:11 pm)
December 14, 2011, 11:34 am #42
I'm afraid I'm only just getting to having the time spare to start playing with this (no clones for me, sadly). Catching up after being off for surgery. Well, trying to catch up, anyway.

Wondering whether to join the fun with version one, or wait in queue for version two... When's it due, your number two?

One of my two Xentas is developing a hardware fault, I think (part of display isn't ... displaying) so I may only update the one to start with, else I'll get very confused as to what's not working, and what I just can't see!

I've gotta say, I think that this is simply impossible for one guy to have done in his spare time, especially with Christma.... Oh... William, do you have a red outfit, a bobbly hat, big belly and a few elves to help? Better get all this finished by 24th, as you'll be otherwise engaged that night!

B
December 14, 2011, 11:16 am #43
Quote:
Quote:
One other thing - on the old firmware, you could "pg up" and "pg down" where you had long lists. There's less of a need in your firmware, since the scrolling is so much quicker / responsive, but it's a "nice to have".
Up/Down still goes up and down, left/right goes a page backward/forward. After the upcoming update this will also work with the top buttons.

One option i would like is looping in menu's / lists. Scrolling now stops at the beginning / end of a list/menu. I prefer scrolling to the oposite end of the list/menu.

December 14, 2011, 10:50 am #44
Quote:
One other thing - on the old firmware, you could "pg up" and "pg down" where you had long lists. There's less of a need in your firmware, since the scrolling is so much quicker / responsive, but it's a "nice to have".
Up/Down still goes up and down, left/right goes a page backward/forward. After the upcoming update this will also work with the top buttons.
December 14, 2011, 9:58 am #45
Superb! Great work - Thanks!

One other thing - on the old firmware, you could "pg up" and "pg down" where you had long lists. There's less of a need in your firmware, since the scrolling is so much quicker / responsive, but it's a "nice to have".

Many thanks for your hard work!

Quote:

Ok, tests done.

These Flac samples: http://ff123.net/samples.html are played without problem.
Of course the one from OldTT crashed the player.. :/
After a change there it works.
Ogg also works fine. Will be added to the next release

 

December 14, 2011, 9:18 am #46
Auto power off / Sleeptimer and screensaver are added to the code.
The first post in this thread shows all changes sofar.
December 13, 2011, 9:37 pm #47

Ok, tests done.

These Flac samples: http://ff123.net/samples.html are played without problem.
Of course the one from OldTT crashed the player.. :/
After a change there it works.
Ogg also works fine. Will be added to the next release

 

December 13, 2011, 9:15 pm #48
well, just when the 'fading' starts, your player will grind to screeching
halt, emitt a constantly whisteling tone, somewhere between a train
whistle and grinding a stone, at top volume. and totally freezes - no way
to turn it off. and since you got batteries in it, even unplugging does not help ...

life is fun!

greetings      - heinz -
December 13, 2011, 9:09 pm #49
got me
December 13, 2011, 9:06 pm #50
trapper, tks a lot - lovely song.  to listen to in bed before fading away, right?

greetings     - heinz -

PS: beat you to it, william, by 1.5 minutes.


(Last Edited by heinz57g on December 13, 2011, 9:08 pm)
December 13, 2011, 9:04 pm #51
Quote:
may I assist:

Thanks oldtrappertom.. got it..

 

December 13, 2011, 4:06 pm #52

Did you check ogg and flac already?
At least ogg was playing without problems here earlier on.
Oh, private collection.. thus locally stored.. thus mediaplayer section.. I guess I need to add some file extensions for that..
are they just .ogg and .flac ? I probably should get some reference files for testing.

December 13, 2011, 2:52 pm #53
I too am having problems with the samba share being blank, but I understand that's under control.

In addition, can I request that ogg and flac are accepted by the unit - most of my library is in these, and I was transcoding over uPnP, but would prefer to simply play, rather than transcode.

Thanks,
December 13, 2011, 6:55 am #54
Quote:
PS: is the FW for download already the updated version?
No, we are still on 1.0
I have a few mor things to fix before I can release the update.
But as you can see above a lot of the critical things are already fixed.
Quote:

My time zone is +12   Auckland, Wellington, Fiji

Just noticed, screensaver time on the menu doesn't go anywhere....

Ok, will check the timezone, the screensaver indeed is not working yet. (Was not really an important feature for me)

 

December 12, 2011, 11:59 pm #55

Hi, ich habe den einen oder anderen Bug zu melden.

Wenn ich am Arnova einen Internet-Radio Sender einstelle der vom Device nicht abgespielt werden kann komme ich aus dieser Situation nur raus wenn ich das Arnova ausschalte! Ausschalten per Fernbedienung geht!

Das Arnova hat keinen FM-Tuner! 

Was nicht schön ist: man muss zweimal auf EXIT drücken wenn man einen Sender eingestellt hat und möchte einen anderen einstellen.

Die Tasten PAGE UP und PAGE DOWN  an der Ferbedienung sind ohne Funktion.


PS aktueller Browser OPERA, ich kann dies hier nur schreiben wenn ich -maskieren als Firefox- einstelle unter -Seiten spezifische Einstellungen-


December 12, 2011, 11:29 pm #56

Hello William

 

My time zone is +12   Auckland, Wellington, Fiji

Just noticed, screensaver time on the menu doesn't go anywhere....

 

Rob

December 12, 2011, 11:14 pm #57
cloned? once i would have understood, but three times?

greetings      - heinz - (you ARE aware what time it is, no?)

PS: is the FW for download already the updated version?

(Last Edited by heinz57g on December 12, 2011, 11:15 pm)
December 12, 2011, 11:13 pm #58
We have 24, but I cloned myself  
December 12, 2011, 11:04 pm #59
william, i have a rather personal question: how many hours a day does the netherlands have?

greetings, a rather baffled    - heinz -

December 12, 2011, 10:59 pm #60

Ok, lets continue in this thread. The other is getting long..

Little progress report

Fixed (or at least I think they are):
- Connection problems should have been solved
When you power up, there is a red "network" icon in the lower right hand corner. This means the network has not been setup yet.
This red "network" icon will change to green when the network drivers and configuration has been loaded.
If the network has been setup correctly, the green icon should change to a white signal strength indicator within a few seconds..
At this point the connection is working properly. (the connection has been tested by a probe to a public server and there was a check for new firmware on this server)
- Static IP now also works
- Network status has been modified and gives more details
- Top device buttons can be used in most of the menus/screens
- Under settings, setting "MyFavorites user account" will instantly clear the favorites cache.
- French language has been added
- Stocks are working (just a fun thing anyway I guess)
- MediaPlayer previous/next song works..
- Manual setting the time works. (and survives reboots) 
- NZ times should have been fixed.
- Clock brightness reset issue is fixed.
- OGG File support
- Flac file support
- FM Radio digits repositioned
- Auto Power Off / Sleeptimer added
- Deleting stored wifi networks
- Improved Samba
- Twitter account setting is now correctly saved
- FM Radio presets added. Now Radio has 2 operation modes, Tuning mode and Preset mode. Toggle with OK button. In preset mode use < and > to switch between the six on screen stored frequencies.
In Tuning mode use ^and V for freq. up/down scanning, < and > for regular tuning up/down in .10 mhz steps.  Press FAV to assign freq to selected memory preset.
- The Alarm clock has been fixed. Alarm can be set once, every day, mon-fri, mon-sat and weekend only. OK/Directional pad activates snooze, exit/menu button deactivates the alarm.

Under investigation:
Final tests in progress

On hold/Planned for a future update:
WEP support (only 1st key is supported now)
Hidden SSID and SSID with spaces
uPNP
Screensaver
Buienradar -> needs a special version of animated Gif..
Genre options when browsing TV/Radio lists 
Scrolling texts when texts are too long
Graphics/layout improvements
Display song duration and related info
Playing multiple directories at once in mediaplayer
Auto reload interval for twitter/weather

I am working on everything that was reported in the other thread. Of course the most critical issues are worked on first...
More feedback is welcome. 


Release expected very soon.. doing final tweeks..!! *probably 20th/21st*


(Last Edited by penbex on December 20, 2011, 10:37 am)
Main Board Index Forum Index
 
 

Get notified of new forum posts via